Lead –acid battery technology is the oldest and still a successful secondary battery technology for many applications such as uninterruptible power supplies and automobile SLI (starting, lighting and ignition). The continuum model for the lead-acid battery has significant porosity variations as a function of time and distance across the thicknesses of porous electrodes due to sulfate formation at porous electrodes. The model is capable of quantifying the effects of corrosion on the electrochemical performances.It can be seen that a significant loss in capacity, which is close to the end of life capacity, is noticed due to the decreased grid conductivity at the positive plate within first 25 cycles of charge and discharge. Finally, the corrosion phenomenon is incorporated as a side reaction that is taking place in the positive plate..1-2Typically, the cycle life of a portable lead-acid battery is between 200 and 400 cycles during low to moderate rates of operations.

These approaches are used to examine the effects of corrosion during discharge, rest and charge processes. Three Copper Nickel welding wire Suppliers different modeling approaches are used to incorporate the effect of corrosion in the first-principles based porous electrode model of a lead-acid cell. This phenomenon is also called premature capacity loss. The positive grid material is a pure lead, Pb, or an alloy with antimony, Pb-Sb and the positive active material is the lead dioxide, PbO2. This effort has been attempted in this work. Corrosion leads to a passive layer formation between the grid and the active mass. The performances of both the flooded and valve-regulated lead-acid battery designs are affected by this corrosion process. One of the factors that limit the cycle life of this battery technology is the corrosion process that is taking place between the positive grid material and the positive active material at about 50 to 350 mV close to the open-circuit potential of the positive plate. It was found from the further investigation that the model with corrosion mechanism incorporated as a side reaction might be suitable for studying the effects of corrosion on the cycling performances of a lead-acid cell.

Thus, it is important to qualitatively represent this mechanism using a mathematical model. Next, a current-resistant due to the formation and growth of passive corrosion layer. Thus, the model developed with the fellowship support will be a very useful tool to investigate the methods that can possibly mitigate this degradation effects. This reaction not only decreases the positive grid conductivity but also consumes water. The electrochemical reaction that causes this corrosion process can be expressed as:Pb+2H2O PbO2 + 4H+ +4e-It is important to mention that the lead, Pb in this reaction, is coming from the grid material and it is different from the spongy lead material, Pb that is used as negative active material in the negative electrode. First, the electronic conductivity of the positive plate is empirically expressed as a function of N, the number of cycle. Figure 1 shows the effect of corrosion on the electrochemical performances of the lead-acid cell as a function of cycle numbers at high rates of charge and discharge. A detailed explanation on this conclusion and the derivation of the continuum model can be found elsewhere